It is an Automatic Programmable Coolant Nozzle System for Cooling the most challenging Setups in the World! It can be setup on most CNC Machining Centers.
SpiderCool memorizes where coolant is aimed on each tool, then adjusts automatically while the machine is running oriented so the coolant stream is aligned to the spindle centerline.
On standard installations, the machine's existing coolant pump is plumbed to the SpiderCool and the same Coolant ON-OFF commands are programmed into the control.
A higher volume/pressure coolant pump can be installed to dramatically improve cutting performance.
There are no M-Codes or G-Codes to write into your program, and adjustments can be made and re-memorized at any time during the machining cycle
Take me To: Spider Cool >>
Copyright 2019 ShopFloorManager
All Rights Reserved
ShopFloorManager Registered Trademark of CCI.
Click here for ShopFloorManager
CAD/CAM Integration, Inc.
3 Bessom St. #212
Marblehead, MA 01945
Contact Information:
Phone: 1-781-933-9500
Fax: 1-781-494-9585
sales@shopfloormanager.com