36 Years Providing Solutions for Manufacturing!

The Most Informed
Businesses Choose

Phone: 1-781-933-9500

Fax: 1-781-494-9585


Machine Event Creation, Collection, Reporting and Management Module
Take control of your Production by Capturing and Recording Machine Tool Events
Part of an Integrated Family of ShopManagerTM EventAwareTM Modules
Supports Windows 10TM & Windows 8TM including Support for Terminal Server 2008/2010/2012

ShopMonitorTM is the ShopFloorManagerTM Component Module for Efficiently Creating, Managing, Collecting and Reporting Real-Time Machine Tool Production, Measurement, Maintenance, etc. Events.

You can use ShopMonitor to Manage and Create virtually any type of a Machine Tool Related Event to Collect, Record, Generate Reports and Display Real-Time Charts For: Cycle Counts, Cycle Times, Idle Times, Cycle Start, Cycle End, Probe Measurement, Tool Changes, Feed Rate Override, Machine Hold, Maintenance, etc.

You can insert the appropriate Events into DNC Files or Macros so when a Program or Macro executes a ShopMonitor Event is output from the Machine Tool and communicated to ShopFloorManager where it is intercepted, parsed and Recorded in the Database and past on to ShopCharts where these Events are display Real-Time.

If you have Manual Machine Tools and or other types of Cost Centers and would like to collect Events use ShopMDITM. ShopMDI can also be used for tasks such as collection Maintenance Information.

ShopMonitorTM is an Event & Report Generator with Intelligent Real-Time Charting

Cycle Start Cycle End Tool Change Probe Measurement Maintenance Start Machine Idle Do you Have Events Going On in Your Shop? Are Your Events Unique? Would you like to Create, Deploy, Capture and Report Them? Use ShopManager to do it All and Analyzes the Results!



ShopMonitor'sTM Basics Include:
  • EventAwareTM Technologies (Applications Automatically Capture Configured Events)
  • Create your own CNC Events
  • Configure CNC Events
  • Real-Time CNC Status Displayed
  • Real-Time Intelligent Charting
  • Real-Time Emailing of Selectable Events
  • Configurable Report & Report Filters For All Reports
  • Save Report Filtered Template For Single Click Reporting
  • Embed Events in Dummy DNC Files and upload (If your Controller doesn't support Macros)
  • DPRNT And Macro B Support
  • Programmable Logic Controller Support
  • Haas Software & Hardware I/O Event Monitoring Support
  • ShopMDI - Manual Data Input for Manual Machines, Non-Macro Machines, Data Centers and or Maintenance.

DPRNT And Macro B

ShopMonitorTM using DPRNT(s) And Macro B(s) Supports:
  • Inserting Start/End DPRNTs Events Directly into your N/C Programs
  • Capturing of Embedded DPRNTs in N/C programs(start, end, tool changes, probe collection, etc.)
  • Capturing DPRINTs generated by Macro B routines on controllers
  • Processing these Machine/Production/Probe Events in real-time
  • Storing these Events in ShopFloorManager's database
  • Generating Configurable Machine/Production/Probe Reports

ShopIO Event Capture

ShopMonitor'sTM I/O Event Capture (ShopIOTM) Supports:
  • Capturing digital I/O if your controller doesn't support DPRNTs
  • Monitor Machine Tool I/O signals for: Cycle Start, Cycle Stop, Tool Change, Feed-Hold, Feed-Rate Override, etc. using your Company's Ethernet Network!
  • Use I/O Signals "Mind" from your Machine Tool, connect ShopFloorManager's ShopIO Module and continuously Monitor Machine Events while displaying these Real-Time using ShopFloorManager's: Machine Status Display; ShopCharts; ShopReports!

Create Event
Reports With
Configurable Filters

ShopMonitorTM Supports Configurable Reports so You Can:
  • Generate Machine Event Reports
  • Generate Session Activity Reports
  • Generate Collected Data by Machine and Data Item Reports
  • Generate Collected Data by Data Item and Machine Reports
  • Generate Machine Utilization Chart Reports
  • Generate & Display Real-Time Utilization 7-Day History Chart (ShopCharts)

Configurable Machine

ShopMonitorTM Allows you To:
  • Create DPRNT Event Cycle Count Commands
  • Create DPRNT Event Tool Change Commands
  • Create DPRNT Event Probe Data Commands
  • Create Virtually any DPRNT Event Commands

Note: These DPRNT commands can then be placed in the DNC File at the appropriate place to generate the Machine/Production/Probe/Ect. Events so you will always know how efficient your shop is!

Save Current Filtered &
Report Template For
Single Click Reporting

ShopMonitorTM Allows you To:
  • Create Individual Event Report Templates
  • Save Individual Event Report Templates as Shared with Your Report Name
  • Save Individual Event Report Templates as Private with Your Report Name
  • Copy, Modify and Save an Existing Template
  • Note: This allows you to choose a Template/Report by simply clicking your saved Template and automatically generating your reports.

    Configure once for Single Click Reporting!

Real-Time Machine
Status Displayed At
Any ShopManager Client

ShopMonitorTM Allows you To:
  • Display the current Event being processed on selected Machine Tools in Real-Time
  • Select the Displayed List of Monitored CNCs at Each Client
  • Select a Different List of Monitored Machine Tools at Different Clients
  • Display a Green Light if a Machine is Running
  • Display a Red Light if a Machine is not Running
  • Note: This Real-Time Data Displayed can includes Machine Name, Last Event Command, DNC File, DNC File Version, Status, Run, Idle, Elapsed Time, Cycle Count, Start Time, Last Event Time, Exceptions, Tool Number, Probe Val, Tool Number, Spindle Load, etc.

Real-Time Intelligent
Charting Displayed at
Any ShopManager Client

ShopMonitorTM Allows you To:
  • Select a Specific Machine Tool using its Events to display an Intelligent Chart(ShopCharts)
  • Displays: Machine Name, Last Event Command, DNC File & Version, etc. Real-Time Charting
  • Select a Different List of Monitored Machine Tools at Different Clients
  • Note: You can interactively click on the ShopCharts' Display and retrieve collected data for that Event!

Real-Time Emailing
Of Selected Events

ShopEMailTM Allows you To:
  • Email Events from Machine Tool Macros
  • Email Events from Machine Tool DNC File
  • Email Events from ShopMDI
  • Note: You must be able to support SMTP to Email!

Copyright 2019 ShopFloorManager
All Rights Reserved
ShopFloorManager Registered Trademark of CCI.
Click here for ShopFloorManager

CAD/CAM Integration, Inc.
3 Bessom St. #212
Marblehead, MA 01945

Contact Information:
Phone: 1-781-933-9500
Fax: 1-781-494-9585